Last update 16. 02. 2024
27 recalls for 13 Peugeot models in 2023
Peugeot has 27 recalls for 13 models in the EU Safety Gate (formerly Rapex) system for 2023. As in the previous year, this is the second highest number of all carmakers.
Peugeot’s most recalled model is the 208, a small hatchback with nine recalls. Only one fewer in 2023 had the Peugeot 308, 3008 and Peugeot 508. The Peugeot Partner was recalled five times. The oldest recalled Peugeots are from 2014.
Safety Gate does not provide the numbers of potentially affected cars in its reports, so we always verify them from other sources. Since the beginning of 2023, we have also been monitoring the database of the German Federal Motor Transport Authority (KBA, Kraftfahrt-Bundesamt), which publishes the numbers and also often includes Peugeot recalls that Safety Gate does not record. Some of them can be found below.
Peugeot recalls in Safety Gate
In 2023, the following models were recalled: Recalls will be displayed when you click on the link.
These models were recalled in 2023. See also the latest recalls.
Peugeot recalls in the German KBA database
From our KBA section, we pick out some of the largest Peugeot recalls of the past year.
- Peugeot electric cars: Drive loss due to faulty control unit
- Peugeot 208: Loss of control due to incorrectly fastened tie rods
- Peugeot 208: Overheating of the brake pads
- Peugeot 508 and 3008: Potential battery fire
- Peugeot 508 and 3008: Water penetration can lead to a vehicle fire
- Peugeot recalls 550,000 cars: No warning when SCR catalyst is deactivated
- Peugeot 208, 308, 3008, 5008: Low urea consumption is incorrectly evaluated
- More KBA recalls for Peugeot
Peugeot recalls in the United Kingdom
You can also find Peugeot recalls on our website car-recalls.co.uk. These are the recalls published by the Driver and Vehicle Standards Agency (DVSA) in the UK.
Check also the Service Bulletin (TSB)
This summary is not intended to provide comprehensive information on all Peugeot recalls in 2023. Only those that have been reported to the European Safety Gate alert system are listed. In addition to recalls, car manufacturers also carry out so-called service campaigns (Technical Service Bulletin – TSB), which are not reported anywhere and are only carried out on vehicles that arrive at an authorised workshop for servicing. We describe the difference between a recall and a service campaign in more detail in this article. This overview should prompt second-hand owners of older cars to contact an authorised workshop and ask if any recall or service campaign has been announced for a particular car. We advise how to do this here.
Peugeot recalls in 2023 by model
Peugeot 208
| Issued | Problem | |
|---|---|---|
| Peugeot 208 (2023) | 23/12/2023 | A fastening clip on the windscreen pillar trim could be rotated by 180°. As a result, when the curtain airbag... |
| Peugeot 208 (2022 – 2023) | 04/12/2023 | Due to an error in the specific calibration software of the electronic engine control unit (ECU), an incorrect value may... |
| Peugeot 208 (2019 – 2023) | 27/11/2023 | The evaporative emission of the vehicle is too high, causing excessive pollution. The hydrocarbon (HC) level is above the legal... |
| Peugeot 208 (2023) | 08/07/2023 | The rubber in the tyres originally supplied with the car may be inadequate, which can decrease manoeuvrability by affecting the... |
| Peugeot 208 (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
| Peugeot 208 (2021 – 2022) | 06/03/2023 | Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may... |
| Peugeot 208 (2020 – 2021) | 27/02/2023 | The vehicle may inadvertently accelerate approximately 30 km/h above the set cruise-control speed when cruise control and the ECO mode... |
| Peugeot 208 (2020 – 2022) | 12/02/2023 | The locking nuts of the steering tie rods may not be properly tightened. This could lead to loss of control... |
✅ All 208’s recalls
Peugeot 301
Peugeot 308
| Issued | Problem | |
|---|---|---|
| Peugeot 308 (2023) | 22/12/2023 | The software for the communication of immobilisation data between the MCU (Motor Control Unit) and the BCM (Body Control Module)... |
| Peugeot 308 (2022 – 2023) | 04/12/2023 | Due to an error in the specific calibration software of the electronic engine control unit (ECU), an incorrect value may... |
| Peugeot 308 (2018) | 24/10/2023 | The ISOFIX clips on the right rear seat may be incorrectly welded. There may be no restraining effect provided by... |
| Peugeot 308 (2023) | 17/07/2023 | The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of... |
| Peugeot 308 (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
| Peugeot 308 (2022 – 2023) | 25/03/2023 | Incorrect torque on various mechanical and electrical connections may lead to loss of control of the vehicle or propulsion failure,... |
| Peugeot 308 (2017 – 2020) | 20/02/2023 | The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment. The Peugeot... |
✅ All 308’s recalls
Peugeot 408
| Issued | Problem | |
|---|---|---|
| Peugeot 408 (2023) | 17/07/2023 | The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of... |
| Peugeot 408 (2022 – 2023) | 25/03/2023 | Incorrect torque on various mechanical and electrical connections may lead to loss of control of the vehicle or propulsion failure,... |
✅ All 408’s recalls
Peugeot 508
| Issued | Problem | |
|---|---|---|
| Peugeot 508 (2019 – 2022) | 29/07/2023 | The traction battery may overheat and cause a fire. The Peugeot 508 vehicles affected by this recall were equipped with... |
| Peugeot 508 (2023) | 17/07/2023 | The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of... |
| Peugeot 508 (2019 – 2023) | 13/06/2023 | Water infiltration can cause corrosion in the battery housing, creating a risk of fire. The Peugeot 508 vehicles affected by... |
| Peugeot 508 (2019 – 2022) | 13/06/2023 | The traction battery can overheat due to faulty monitoring software and catch fire. The Peugeot 508 vehicles affected by this... |
| Peugeot 508 (2022 – 2023) | 25/03/2023 | Incorrect torque on various mechanical and electrical connections may lead to loss of control of the vehicle or propulsion failure,... |
| Peugeot 508 (2018 – 2020) | 27/02/2023 | A software error may cause the engine to stall when operating at altitude in cold temperatures. This can lead to... |
| Peugeot 508 (2018 – 2021) | 20/02/2023 | The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment. The Peugeot... |
✅ All 508’s recalls
Peugeot 2008
| Issued | Problem | |
|---|---|---|
| Peugeot 2008 (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
✅ All 2008’s recalls
Peugeot 3008
| Issued | Problem | |
|---|---|---|
| Peugeot 3008 (2022 – 2023) | 04/12/2023 | Due to an error in the specific calibration software of the electronic engine control unit (ECU), an incorrect value may... |
| Peugeot 3008 (2019 – 2022) | 29/07/2023 | The traction battery may overheat and cause a fire. The Peugeot 3008 vehicles affected by this recall were equipped with... |
| Peugeot 3008 (2023) | 17/07/2023 | The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of... |
| Peugeot 3008 (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
| Peugeot 3008 (2019 – 2022) | 13/06/2023 | Water infiltration can cause corrosion in the battery housing, creating a risk of fire. The Peugeot 3008 vehicles affected by... |
| Peugeot 3008 (2019 – 2022) | 13/06/2023 | The traction battery can overheat due to faulty monitoring software and catch fire. The Peugeot 3008 vehicles affected by this... |
| Peugeot 3008 (2017 – 2022) | 20/02/2023 | The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment. The Peugeot... |
✅ All 3008’s recalls
Peugeot 5008
| Issued | Problem | |
|---|---|---|
| Peugeot 5008 (2022 – 2023) | 04/12/2023 | Due to an error in the specific calibration software of the electronic engine control unit (ECU), an incorrect value may... |
| Peugeot 5008 (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
| Peugeot 5008 (2017 – 2022) | 20/02/2023 | The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment. The Peugeot... |
✅ All 5008’s recalls
Peugeot Boxer
Peugeot Expert
| Issued | Problem | |
|---|---|---|
| Peugeot Expert (2020 – 2021) | 11/02/2023 | AdBlue liquid injection may fall below adequate levels at extremely low temperatures (-15°C) when the tank and fluid temperatures are... |
✅ All Expert’s recalls
Peugeot Partner
| Issued | Problem | |
|---|---|---|
| Peugeot Partner (2022 – 2023) | 01/08/2023 | The maximum load on the factory fitted tyres is lower than the maximum permitted weight on the rear axle. Overloading... |
| Peugeot Partner (2014 – 2018) | 11/07/2023 | The fuse box may not comply with the specifications and water infiltration may occur. This can lead to a short... |
| Peugeot Partner (2017 – 2020) | 20/06/2023 | The lubrication of the vacuum pump may be insufficient and this can cause it to break, which in turn can... |
| Peugeot Partner (2017 – 2021) | 26/02/2023 | The underbody cover fails to stop flammable materials to accumulate under the engine, increasing the risk of fire. The Peugeot... |
✅ All Partner’s recalls
Peugeot Rifter
| Issued | Problem | |
|---|---|---|
| Peugeot Rifter (2017 – 2021) | 26/02/2023 | The underbody cover fails to stop flammable materials to accumulate under the engine, increasing the risk of fire. The Peugeot... |
✅ All Rifter’s recalls
Peugeot Traveller
| Issued | Problem | |
|---|---|---|
| Peugeot Traveller (2020 – 2021) | 11/02/2023 | AdBlue liquid injection may fall below adequate levels at extremely low temperatures (-15°C) when the tank and fluid temperatures are... |
✅ All Traveller’s recalls
Useful links
- Peugeot Reliability
- Peugeot Owners’ Reviews
- Peugeot recalls by model
- Peugeot recalls in 2022
- Other manufacturers in 2023
This overview is purely informative for the manufacturer you have selected. As these deficiencies often relate to specific components (engine type, bodywork, equipment), the recall may not apply to all vehicles of listed model. Contact your nearest Peugeot dealer for more informations.
Currently 5157 Recalls