Which Peugeot models are being recalled in 2019?

23 recalls for 12 Peugeot models in 2019

In 2019, Peugeot announced 23 recalls involving 12 models through the EU Rapex system. The Traveller and Expert vans had the most defects.

We’ve sorted all 2019 recalls according to the model into a table below.

Peugeot’s most failing cars are still the Traveller and Expert vans. In 2019, there were seven more recalls with eight new faults to solve.

Peugeot also had a large recall for its smallest 107 models. The glue that adheres the windowpane to the rear door could come loose with cars manufactured from May 2005 to November 2013.

Tip: Check the vehicle’s history by VIN

The particulate filter can be damaged with the 208, 2008, 308, 3008, 5008, Traveller, and Expert models manufactured from late 2016 to mid-2018. Some models (208, 2008, 3008, 5008, 308, 508) may also exceed the permissible limit of nitrogen oxides. We didn’t save this recall with the Rapex code A12/1592/19 to our archive, as well as some other minor recalls with a production scale of only several days.

With the Peugeot 5008, manufactured from March 2018 to February 2019, the spare wheel may fall out while driving. At the very end of the year, there was a recall for Peugeot 208 and 2008 produced in the first half of 2019. The rear axle retaining bolts may be defective and may break, causing the axle to detach while driving.

We’ve written about some problems in more detail in separate articles.

Peugeot recalls in 2019 by model

Peugeot 107

Month	Issue	Production	Source
I.	The glue that adheres the windowpane to the rear door could come loose.	5/2005 – 11/2013	link
	All 107´s Recalls

Peugeot 208

Month	Issue	Production	Source
II.	The steering column was incorrectly assembled on the shaft of the steering system.	7/2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	11/2016 – 6/2018	link
XII.	The rear-axle fixing screws may be defective and could break.	1/2019 – 6/2019	link
	All 208´s Recalls

Peugeot 2008

Month	Issue	Production	Source
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	12/2017 – 6/2018	link
XII.	The rear-axle fixing screws may be defective and could break.	1/2019 – 6/2019	link
	All 2008´s Recalls

Peugeot 308

Month	Issue	Production	Source
IX.	As a result of an incorrectly calibrated engine, the diesel particulate filter (DPF) could be damaged.	1/2017 – 3/2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	10/2016 – 6/2018	link
	All 308´s Recalls

Peugeot 3008

Month	Issue	Production	Source
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	6/2016 – 6/2018	link
	All 3008´s Recalls

Peugeot 508

Month	Issue	Production	Source
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	1/2018 – 6/2018	link
	All 508´s Recalls

Peugeot 5008

Month	Issue	Production	Source
IV.	The wiring harness on the voltage retaining device (DMTR) may have been inadequately tightened.	2/2018 – 9/2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	9/2017 – 6/2018	link
XII.	The screws of the spare wheel support may be insufficiently tightened.	3/2018 – 2/2019	link
	All 5008´s Recalls

Peugeot Expert

Month	Issue	Production	Source
III.	The wishbone mounting brackets on the rear suspension system are incorrectly fixed and can break.	8/2015 – 12/2018	link
III.	The fastening elements on the steering mechanism are inadequate.	8/2015 – 12/2018	link
IV.	2 faults – aircond + suspension	8/2015 – 12/2018	link
IV.	Excessive loading of the front suspension could result in its loosening.	8/2015 – 12/2018	link
IX.	The support for the counterweight located beneath the rear floor may crack.	2/2014 – 6/2016	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	6/2017 – 5/2018	link
XI.	Тhe seatbelt buckle of the front outer passenger seat can open inadvertently.	9/2015 – 7/2019	link
XII.	The ball joint of the wishbone may loosen up.	MY 2016 – 2019	link
	All Expert´s Recalls

Peugeot iOn

Month	Issue	Production	Source
IV.	Possible defective component in the brake assist system vacuum pump.	4/2018 – 7/2018	link
	All iOn´s Recalls

Peugeot Partner

Month	Issue	Production	Source
VI.	Possible misalignment of the ratchet on the handbrake lever latching mechanism.	10/2017 – 12/2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	11/2017 – 6/2018	link
	All Partner´s Recalls

Peugeot Rifter

Month	Issue	Production	Source
VI.	Possible misalignment of the ratchet on the handbrake lever latching mechanism.	2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	11/2017 – 6/2018	link
	All Rifter´s Recalls

Peugeot Traveller

Month	Issue	Production	Source
III.	The wishbone mounting brackets on the rear suspension system are incorrectly fixed and can break.	8/2015 – 12/2018	link
III.	The fastening elements on the steering mechanism are inadequate.	8/2015 – 12/2018	link
IV.	2 faults – aircond + suspension	8/2015 – 12/2018	link
IV.	Excessive loading of the front suspension could result in its loosening.	8/2015 – 12/2018	link
X.	A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter.	6/2017 – 5/2018	link
XI.	Тhe seatbelt buckle of the front outer passenger seat can open inadvertently.	9/2015 – 7/2019	link
XII.	The ball joint of the wishbone may loosen up.	MY 2016 – 2019	link
	All Traveller´s Recalls

Useful links

This overview is purely informative for the manufacturer you have selected. As these deficiencies often relate to specific components (engine type, bodywork, equipment), the recall may not apply to all vehicles of listed model. Contact your nearest Peugeot dealer for more informations.